All designs will download instantly after payment! Design files are downloaded as a zip file. You will need to be able to open the zip file and extract the files you need for your embroidery machine. You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file. The zip file will contain the above machine formats each insides its own folder.
This is an IN THE HOOP inhaler case design that can be made completely in the hoop, there is no extra sewing needed. Step by step and very detailed instructions with pictures are included! The finished size of the case is 3.2 inches tall and 2.2 inches wide. Inside diameter is about 4.2. To see if your inhaler will fit, measure the distance around the entire inhaler, it needs to be smaller than 4.1″. Fits most inhalers, but as some are unusual sizes, will not fit all. Shown with a PRO-AIR inhaler.
Requires snap pliers and snaps, any stabilizer, and felt or vinyl or other non-fraying fabric. Inside pocket diameter is 4 inches overall so be sure your snap pliers will fit inside this opening to be able to put a snap on the case. The Kam Snap pliers DO work great! The Kam Snap Press will NOT work as the base is too large to fit inside the case. REQUIRES 5X7 HOOP! Stitches 2 cases in the 5×7 hoop.