Product Description
All designs will download instantly after payment! Design files are downloaded as a zip file. You will need to be able to open the zip file and extract the files you need for your embroidery machine. You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file. The zip file will contain the above machine formats each insides its own folder.
This is an IN THE HOOP design that can be made completely in the hoop, there is no extra sewing needed. Requires vinyl or other non-fraying fabric, FOE or straps and sorts of hardware of your choice, and NON-METAL zipper 10″ or longer.
Step by step and very detailed instructions with pictures are included!
Comes in 2 sizes- 6×10 hoop and 8×12 hoop. The 8×12 hoop requires your hoop to be at least 7.9×9.4, so the mb4 hoops will work.
Includes a single needle file AND a multi needle file. They are identical except the multi-needle has the seams for the ears on the inside and the single needle has the ears stitch flat so you do NOT turn them right side out, making the seams on the outside so there will be less of a lump since single needles do not raise the foot high enough to clear a large lump.
There WILL be a lump of seams using the multi-needle file when being stitched so do NOT attempt this with a single needle, your foot will NOT clear it! My 10 needle and mb4 stitch through it just fine, but use your best judgement on if your machine can handle this design. I HIGHLY suggest single needle users ONLY use the single needle file.
Using hardware and straps or FOE, again, single needle users make sure you know your machine to know what it can stitch through. If you use stitched in straps, you will need the machine foot to clear all that piled in the middle so you probably want to use FOE and D-rings with a single needle.
There is a video in my facebook group on how to stitch this out!
Click Here for the video- here
