Product Description
All designs will download instantly after payment! Design files are downloaded as a zip file. You will need to be able to open the zip file and extract the files you need for your embroidery machine. You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file. The zip file will contain the above machine formats each insides its own folder.
This is a combo ith/sewing design that is made in 2 hoopings. This has a top zipper and a side zipper, both fully lined. This does not include a strap, you will need to make one or buy a premade strap or wristlet. This is done 90% in the hoop. You will need to sew around the fabric lining and the sides of the purse where the zipper is attached on a regular sewing machine. This takes a 8×9.5 hoop or larger and it is single needle friendly. There is a pdf step by step with pictures instructions and this video! beth clutch video
Supplies-
SF101
Tear away stabilizer
Premade wristlet or strap
6” of size 5 zipper tape and pull (vertical zipper)
10” of size 5 zipper tape and pull (top zipper on main part of bag)
(2) 5/8” D rings
CUT 2- .75”x2.5” vinyl- (Piece A)- for hardware loop
1.5”x2.5” vinyl- (Piece B)- for vertical zipper tab
(2)- 1.5”x2.5” vinyl- (Piece C)- for vertical zipper tab
7”x5.75” vinyl (Piece D)- for side pocket exterior, I used a panel
3.5”x6” vinyl (Piece E)- left exterior strip
10.25”x 3.25” vinyl (Piece F)- top exterior strip
2”x3” vinyl (Piece G)- lip balm holder
10.25”x8.5” vinyl (Piece H)- for back of bag)
(2) 8”x8” fabric (side pocket liners)
(2) 10.25”x8.5” fabric (for inner lining of full bag)
