Product Description
All designs will download instantly after payment! Design files are downloaded as a zip file. You will need to be able to open the zip file and extract the files you need for your embroidery machine. You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file. The zip file will contain the above machine formats each insides its own folder.
5×7 hoop required. This also needs a regular sewing machine where about 20% of the sewing is done. This will stitch the 5 small panels for the ice cream scoop, then you cut out and they are stitched together about 80% in the hoop, then you will stitch the 2 halves together on the regular sewing machine. Cone is stitched about 90% in the hoop, then you stitch the last step and top stitch it on the sewing machine. You will also need a needle and thread to stitch up a 1″ open area on both. These use magnets hot glued on the inside of the scoops to make them stay together. Depending on the size and strength of magnets, you may not be able to keep all 3 scoops together without a little bit of balance. Magnets need to be smaller than 25mmx3mm. Using the 15mmx3mm magnets HERE , you can easily make 2 scoops stick together, but 3 takes a kiddo balancing the cone a bit.
Includes the cone and 3 “flavors” of ice cream scoops.
