Product Description
All designs will download instantly after payment! Design files are downloaded as a zip file. You will need to be able to open the zip file and extract the files you need for your embroidery machine. You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file. The zip file will contain the above machine formats each insides its own folder.
This file is made to create zipper sections of sewing purses. This is not an actual purse, you will use the zipper panel you make in various patterns.
Two types included! Includes a file for size 3 zippers and a file for size 5 zippers!
Comes in 4 sizes- 7.0” wide, 10.3” wide, 11.9” wide, and 14.0” wide. Use the file that is closest to your pattern need, but NOT SMALLER than your needs. You can cut the edges off to make it the exact size after it is done stitching.
Use ONLY tear away stabilizer and a nylon zipper so your machine can go through the zipper teeth. Make sure your pieces are cut to measurements
Zipper- must be at least 2” longer than the design file width, you can cut excess off at the end of the project.
Main vinyl of the zipper area (the pokemon shown in the example)- at least 1” tall and as wide as the design file you are using. You will need 2 of these, one for above the zipper and one for below the zipper.
Overlay Strip (the red strip in the example)- ½” tall and as long as your design file. If you cut it taller than ½”, you will need to trim it after it is sewn. You will need two of these.
Picture 1 shows the finished ITH stitch out. Picture 2 shows how I then used a regular machine to stitch the zipper strip to the gusset to make the mav pack and then pic 3 is both the number 3 and number 5 zippers on the packs.
